The CodeMark Certification Scheme(CodeMark) is a voluntary third-party building product certification scheme, administered by the Australian Building Codes Board (ABCB).
It supports the use of new or innovative building products in specified circumstances in Australia, by providing a nationally accepted process for demonstrating compliance with the National Construction Code (NCC).
A certificate of conformity is one of several options available for meeting the ‘evidence of suitability’ requirements of the NCC.
Demtech are proud to announce that a number of our Cureflex waterproofing membranes have now achieved CodeMark Certification.
· Cureflex SLR2000
· Cureflex UVX4000
· Cureflex PCM17
CodeMark Certification provides confidence to the market and certainty to regulatory authorities that products perform to standard that conforms with the relevant NCC requirements.
Cureflex® SLR2000 Waterproof Membrane
Cureflex® SLR2000 is a class III membrane which provides superior protection and offers outstanding waterproofing advantages such as low water vapour transmission properties and the ability to withstand permanently wet conditions without fear of re-emulsification.
Suitable for internal and external under-tile applications on both domestic and commercial projects
Keep an eye out for our signature violet colour!
*CodeMark Certified under certificate number CM20304
FEATURES & BENEFITS
- Signature violet colour.
- Solvent free formulation.
- Easy to apply with a brush or roller
- Strong adhesion properties.
- Leaves a durable, seamless finish.
- Suitable for internal and external use.
- Will not re-emulsify over time.
- Exceptional flexibility and impressive elongation properties.
- Excellent vapour barrier with low water vapour transmission properties.
- Engineered to withstand ponding and permanent wet conditions.
- Moisture barrier between concrete substrates and timber flooring.
- Moisture barrier between timber substrates and other toppings such as screeds, tiles and vinyl.
TYPICAL AREAS OF USE
- Applications over Insitu® shower bases, niches and balcony panels.
- Bathrooms, ensuite, powder rooms.
- Balconies, terraces and facades.
- Laundries, kitchens and more.
PREPARATION & APPLICATION
- All substrates must be clean and free from any contaminants before application. Suitable for applications on porous surfaces when primed using Cureflex® PG57.
- Suitable for applications on non-porous surfaces when primed using Cureflex® LS151.
- 2 coats are recommended for general wet area applications (minimum coverage of 1.5L/m2).
- Requires a suitable bond breaker at all substrate junctions, usually applied on the first coat (Cureflex® Flexiban recommended).
Cureflex® UVX4000 Waterproof Membrane
Cureflex® UVX4000 is an industrial grade, Class III waterproof membrane which is resistant to permanent UV exposure.
UVX4000 also acts as a thermal barrier for roofs, floor and wall substrates, reducing heat absorption into buildings.
CodeMark Certified under certificate number CM20310
TYPICAL AREAS OF USE
- Applications over Insitu® shower bases, niches and balcony panels
- Bathrooms, ensuite, powder rooms (as a second coat over SLR2000).
- Balconies, terraces and facades (as a second coat over SLR2000).
- Portable buildings/workshops
- Farming sheds/storage buildings.
- Factories and warehouses.
PREPARATION & APPLICATION
- All substrates must be clean and free from any contaminants before application.
- Suitable for applications on porous surfaces when primed using Cureflex® PG57.
- Suitable for applications on non-porous surfaces when primed using Cureflex® LS151.
- 2 coats is recommended for general wet area applications (minimum coverage of 1.5L/m2 ).
- Requires a suitable bond breaker at all substrate junctions, usually applied on the first coat (Cureflex® Flexiban recommended).
FEATURES & BENEFITS
- Ready for immediate use.
- Easy to apply with a brush, roller or even spray equipment.
- Environmentally safe.
- Unique thermal barrier protection.
- Strong adhesion properties.
- High-build, seamless finish.
- Resistant against foot traffic.
- Reinforced to prevent cracking.
- Superior elastomeric properties
- Ability to apply at a minimum 3mm thickness and up to 6mm thickness for extreme conditions.
- Ideally suited for new construction and remedial works over aged or failed membranes.
- Flexible for structural sheeting surfaces, such as CFC sheeting, Hebel panels and plywoods.
- Ability to withstand harsh dry and wet environments, including ponding without re-emulsification.
Cureflex® PCM-17 Waterproof Membrane
Cureflex PCM-17 is a fast drying 2 PART polymer cementitious waterproof membrane that is suitable for a wide range of waterproofing applications such as balconies, terraces, retaining walls, swimming pools and more!
CodeMark Certified under certificate number CM20308
FEATURES & BENEFITS
- Solvent free formulation.
- Easy to apply with a brush or roller.
- Strong adhesion properties
- Leaves a durable, seamless finish.
- Suitable for internal and external use
- Exceptional flexibility and impressive elongation properties.
- Will not re-emulsify over time.
- Engineered to withstand ponding and permanent wet conditions.
- Holds its own weight over both horizontal and vertical substrates.
PREPARATION & APPLICATION
- All substrates must be clean and free from any contaminants before application.
- Suitable for applications on porous surfaces when primed using Cureflex® PG57.
- Suitable for applications on non-porous surfaces when primed using Cureflex® LS151.
- Requires a suitable bond breaker at all substrate junctions, usually applied on the first coat (Cureflex® Flexiban recommended).
TYPICAL AREA OF USE
Applications over Insitu® shower bases, niches and balcony panels.
Balconies, terraces and facades.
Water features and swimming pools.
Retaining walls and planter boxes.
Water tanks and other water storage
For more information on these products please call 1300 300 090 or send us an enquiry through the enquiry form below.
ENQUIRY FORM
