Cureflex LS-151 Resurfacing Primer provides a high strength film over non-porous surfaces creating an excellent new surface that allows tiling, rendering, and other construction materials to adhere to without the aid of expensive, hazardous epoxy/polyurethane adhesives. It provides a quick, cost effective alternative solution.
Cureflex LS-151 Resurfacing Primer is a high adhesion primer solution specifically engineered to radically improve non porous surfaces and substrates such as metals, polished, glazed and extremely dense surfaces.
Cureflex LS-151 Resurfacing Primer can be applied using brush or roller over clean surfaces. Cureflex LS-151 Resurfacing Primer has been field and laboratory tested to ensure it satisfies and exceeds industry requirements.
Looking for a distributor?
INTRODUCTION
Cureflex® LS151 is a high strength resurfacing primer that creates an excellent new surface over non-porous substrates in preparation for tiles, render or other construction materials.
It provides and quick and cost effective solution when compared to epoxy or polyurethane adhesives.
Cureflex® LS151 has been field and laboratory tested to ensure it satisfies and exceeds industry requirements.
FEATURES & BENEFITS
- Ready for immediate use.
- Solvent free formulation.
- Easy to apply with a brush or roller.
- High level of water resistance.
- Fast drying (temp. dependant).
- No grinding or etching required.
- Free of hazardous odours/vapours
- 1L/10-12m2 approximate coverage.
PRIMING USES
Helps prime before:
- Self leveller & Ceramic tiling
- Waterproofing & Rendering
- Screeding & Vinyl laying
- Carpet laying & Floorboards
SUITABLE MATERIALS
- Insitu® products including shower bases, niches and balcony panels.
- Cureflex® waterproof membranes
- Exposed metal surfaces such as aluminium, stainless steel, brass, copper, even galvanised iron.
- Polished surfaces such as porcelain
- Solid timber boards that have been sealed (with a laquer for example).
- Glazed surfaces such as ceramic tiles, glass bench-tops, glass splash-backs and other sealed surfaces
- Other non-porous and shiny surfaces including PVC and ABS plastics, vinyl, paint, laminex, epoxy and polyurethane finishes.
CURING & COVERAGE
- Ensure concrete slab has cured for a minimum of 28 days before priming.
- Ensure screeds have cured for a minimum of 7 days before priming.
- Ensure waterproof membranes have cured for a minimum of 24 hours.
- All substrates must be clean and free from any contaminants before application.
- Typical applications will only require 1 coat.
- Apply evenly over all surfaces, while carefully avoiding pooling.
- Allow the product to dry completely before the subsequent application of any membranes or adhesives (15-30 minutes, temp. dependant).
Resurfacing Primer
