Name: PG57 Primer 15L
Brand: Cureflex
SKU: CFPG
Availability: InStock

PG57 Primer 15L

$ 105.99 + GST

Cureflex PG57 Primer is a high performance liquid additive designed to offer much more than priming substrates. It can be used as a general purpose primer over open porous surfaces and as a liquid additive to cement based construction chemicals. Adding Cureflex PG57 Primer to other products will increase strength, improve flexibility and workability, create high adhesion properties and extend working time.

Weight

14.9 kg

Dimensions

31 × 31 × 30 cm

Brand

Cureflex

Cureflex PG57 Primer is engineered for commercial use as a high bonding agent performance modifier in construction chemicals.

Cureflex PG57 Primer is a full strength, non-tacky styrene acrylic polymer used to prime and condition substrate surfaces for high adhesion and also applied as an additive to any product requiring high performance polymer to improve water resistance, strength and flexibility.

Download Specs

Looking for a distributor?

We only work with the best. Get in touch with one of our trusted distributers today.

Find The Nearest Distributor

INTRODUCTION

Cureflex® PG57 is a high performance liquid primer that can do much more than just prime substrates.

It can be used as a general purpose primer over open, porous surfaces or as a liquid additive to cementitious construction adhesives and membranes.

Cureflex® PG57 is a non-tacky, styrene-acrylic polymer, engineered for both commercial and domestic use as a high performance bonding agent.

Using it as an additive in other products will increase strength, improve flexibility and workability, increase adhesion properties and extending working time.

FEATURES & BENEFITS

SUITABLE MATERIALS

Suitable for use on:

PRIMING USES

Helps prime before:

Self leveller.
Ceramic tiling.
Waterproofing
Rendering.
Screeding.
Vinyl laying.
Carpet laying.
Floorboards.

CURING & COVERAGE

Ensure concete slab has cured for a minimum of 28 days before priming.
Ensure screeds have cured for a minimum of 7 days before priming.
Ensure waterproof membranes have cured for a minimum of 24 hours.
All substrates must be clean and free from any contaminants before application.
Typical applications will only require 1 coat. Very porous surfaces may require a 2nd coat.
Apply evenly over all surfaces, while carefully avoiding pooling.
Allow the product to dry completely before the subsequent application of any membranes or adhesives.
Will not prime surfaces or cure when applied to non-porous materials such as cured membranes, metals, plastics (Use Cureflex® LS151 instead).